Neu-f NF.6601 Manuel d'utilisateur télécharger pdf

neu-f ® • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX • [email protected] • www.neu-f.com

PARTS LIST: TOOLS REQUIRED:

1 – Shifter Adapter 1 – M6x16mm Socket Cap Screw 1 – 9/16” Wrench 1 – 5MM Hex Key Wrench 1 – Large Screwdriver

1 – Locking Plate 1 – 13MM Cable Ball End 1 – T25 TORX 1 – Channel Lock Pliers 1 – Masking Tape

1 – Metal File

1. Grab the rear of the center console top and lift up to detach.

2. Remove the T25 Torx screw and 5mm Hex Key bolt from

each side on the top edge of console.

3. Remove the T25 Torx screw from driver side lower cover

then pull off.

4. With cover removed, remove exposed T25 Torx screw.

5. Remove the T25 Torx from passenger side lower cover then

pull off.

6. With cover removed, remove exposed T25 Torx screw.

7. Tip back top of main console cover to separate from

dashboard, and then lift out.

8. Using one or two screwdrivers pry off cable socket end from

ball on shift lever.

SHORT SHIFT ADAPTER – NF.6601

Fits 2012-up Fiat 500 All Models w/ Manual Transmission

1 2

Page 1

neu-f ® • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX • [email protected] • www.neu-f.com

neu-f ® • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX • [email protected] • www.neu-f.com 9. Using a metal file, go

Pas de commentaire

Neu-f NF.6601 Manuel d'utilisateur